How to Measure Ring Size at Home That Fits Perfectly

To measure the size of your ring at home is not as difficult as it might seem. You really do not have to use a fancy tool or visit the jewelry shop to get a measurement that is comfortable. You can find a fit that will not be too tight or too loose with a few items you already have in your kitchen or junk drawer.

When you order jewelry online, the most effective trick to prevent the inconvenience of a return is to know your Ring Size. It should be tight enough that it never drops off when washing your hands, but loose enough to easily slip over your knuckle with just a small amount of friction. This guide will show you how to get that "Goldilocks" fit using simple methods.

Why Getting the Right Fit is Tricky

And your fingers are not static objects; they vary in size all day long. You experienced this firsthand if you ever noticed that your rings got tight after a salty dinner or a stroll in the heat.

Measure your finger at the end of the day when it is at its largest size in order to have the best result. Whenever you are very cold, it is better not to measure, because your fingers may shrink as much as half a size. Ideally, you want a "room temperature" measurement for the most accurate daily fit.

The String or Paper Method

This is the classic DIY approach. It works well because it mimics how a flexible band sits against your skin.

1. Cut a strip: Grab a scrap of paper or a segment of plain white string. You should not use yarn or ribbon, as they will stretch. It might give you a wrong measurement.
2. Wrap around: Wrap it around the bottom of the finger you wish to measure.
3. Mark the spot: Trace with a fine-tip pen where the string crossed over. You have to be very careful because one millimeter can change your size.
4. Measure with a ruler: Flatten the string. This is how to measure ring size in cm or millimeters. Most sizing charts are in millimeters (mm), which provides the most accuracy.
   
   

Take the Knuckle into account.

A common mistake is only measuring the base of the finger. I’ve seen many people get a "perfect" measurement, only to realize the ring won't actually slide over their knuckle.

When you have big knuckles, you should measure the size at the base and also at the knuckle. Select a size that is just in between those two numbers. This is the most appropriate way of making sure that you are not having a hard time putting your jewelry on each morning.

Use a Ring You Already Love

When you already have a ring that fits perfectly, then half the battle is already won. This is often the most reliable method because you are measuring a shape rather than a soft finger.

• The Inside Diameter: Take a ruler and measure the inside width of the ring. Do not include the metal of the band.
• Match the Chart: If the inside measures 17.3mm, for example, you are likely a US size 7.
  
  

How to Measure Finger for Ring Size Like a Pro

If you want to be 100% sure, you can buy a plastic ring sizer online for a few dollars. These look like tiny cable ties or belts. They are great because you can wear them for an hour while you watch TV to see if the "size" still feels comfortable as your hand warms up.

Understanding the Numbers

When you have your measure, you'll find how far it goes in the standard sizes. The majority of adults are between size 5 and size 9 for women and size 8 and size 12 for men. When your measure falls in between two sizes, it is always better to use the larger one. A jeweler can far more easily make a ring a little smaller later than he can make it a little larger.

Shopping with Confidence

When you are certain of your size, you can get down to the pleasant part: selecting the style. If you are browsing the collections at Hannoush Hadley, keep the bandwidth in mind. A very thick, wide band will be tighter than a thin, dainty band. When you are purchasing a wide ring in the so-called stacker style, you should go half a size higher so that you have more room to breathe.

How to Measure Ring Size at Home: In a Nutshell

Three rules can help you to get it right the first time:

• Measure late in the day.
• Always measure three times to be sure.
• Make sure the size can get over your knuckle.
  
  

Conclusion

Determining your Ring Size doesn't have to be guesswork. You can do online shopping with complete peace of mind using a simple piece of paper or with the help of a ruler and an existing ring. Five minutes to measure it right today saves you the disappointment of having a ring that does not fit tomorrow.

FAQs

1. Is my left hand as large as my right hand?

Usually not. The dominant hand is slightly larger for most individuals. The rule is always to measure the particular finger on which you want to wear the ring.

2. What if I am buying a ring as a present?

It is best done by borrowing one of their rings and tracing the inside circle on a bit of paper. You may then determine the diameter of that circle.

3. Does a wider band need a different size?

Yes. When the band is wider than 6mm, it covers a bigger portion of your finger and therefore is tighter. The majority of individuals increase half a size when wearing wide bands.

4. What if I measure and it still doesn't fit?

Don't panic. The majority of rings (except some eternity bands with stones all around them) can be resized by a professional jeweler with relative ease.